REGBOT version 3
From Rsewiki
(Difference between revisions)
(→Status and observations) |
|||
| Line 18: | Line 18: | ||
* Battery power (XT60) should have small plug on main PCB, so that XT60 plug can be fixed to battery/charger mount. | * Battery power (XT60) should have small plug on main PCB, so that XT60 plug can be fixed to battery/charger mount. | ||
| − | * IR sensor power | + | * IR sensor power control is OK |
Revision as of 09:21, 28 August 2016
Aim
- maintain frame,
- Avoid too many satellite PCB's,
- more powerfull 5V,
- fix PCB errors on version 2,
- new servo interface plug
Status and observations
REGBOT 36 LIV has new board
- Line sensor low power pin (Teensy pin 25) now working. Pin 25 set to output in main.cpp (line 125), and pulsed in main.cpp (line 425 and 466).
- Space for charger is too small - hits line sensor 6-pin plug on main-board and hits line sensor 90 deg 10-pin plug in other end. Should lower buttom plates by e.g. 4mm.
- Battery power (XT60) should have small plug on main PCB, so that XT60 plug can be fixed to battery/charger mount.
- IR sensor power control is OK
