Robobot
| Line 4: | Line 4: | ||
[[File:onshape-view.png|400px]] [[File:camera_placement.png|800px]] | [[File:onshape-view.png|400px]] [[File:camera_placement.png|800px]] | ||
| − | Figure 1. Robobot drawing ( | + | Figure 1. Robobot drawing (V4), all distances in mm (front wheel not in right place) - see drawing https://cad.onshape.com/documents/97c36fb21a7a858c57c0af9f/w/0d867586bc28d7a9194d7ff3/e/ca0f539fa3eee3cfe0ed4130 . |
==Getting started== | ==Getting started== | ||
Revision as of 17:19, 15 December 2017
This page is for ROBOBOT, an extension of REGBOT with a raspberry pi and three wheels.
Figure 1. Robobot drawing (V4), all distances in mm (front wheel not in right place) - see drawing https://cad.onshape.com/documents/97c36fb21a7a858c57c0af9f/w/0d867586bc28d7a9194d7ff3/e/ca0f539fa3eee3cfe0ed4130 .
Contents |
Getting started
This section contains a quick-start guide for the user. It includes how to get the robot connected to Eduroam WiFi for easy access, an explanation of software and software structure and present a few examples to get the robots driving. Press the link below to go to the instructions page.
Instructions for getting started
Full installation instructions
This section contains the complete instructions for setting up a clean Raspberry Pi.
Click on the link below to go the instructions.
Full installation instructions
Setup issues
A number of parameters in the REGBOT part of the robot needs setting.
Some suggestions are provided here:
Status
Se status for robotter sammen med regbot status: REGBOT_robot_status#Robobot.
