Terrain hopper steering
From Rsewiki
(Difference between revisions)
| Line 1: | Line 1: | ||
| − | Overview of new steering proposal | + | Back to [[terrain-hopper]] |
| + | |||
| + | ==CAD drawings== | ||
| + | |||
| + | See https://cad.onshape.com/documents/97c36fb21a7a858c57c0af9f/w/0d867586bc28d7a9194d7ff3/e/ca0f539fa3eee3cfe0ed4130 | ||
| + | |||
| + | ==Overview of new steering proposal== | ||
[[File:off-the-shelf-parts.png | 600px]] | [[File:off-the-shelf-parts.png | 600px]] | ||
Revision as of 07:53, 10 February 2019
Back to terrain-hopper
CAD drawings
Overview of new steering proposal
Figure 1. New steering part maintaining original steering axle position, but replacing with bearings and a belt drive to a maxon gear motor. This figure points to most of the off-the-shelf parts used.
Figure 2. New steering part maintaining original steering axle position, but replacing with bearings and a belt drive to a maxon gear motor. This figure points to most of the parts that needs workshop assistance. Most of the parts - except axlesl (7 and 8) - can be manufactored on own workshop. The axles will be manufactored by axle supplier.
