Flash disk cloning

From Rsewiki
(Difference between revisions)
Jump to: navigation, search
(New page: == SMR Flash Disk Cloning == Some of the SMR's now have solid-state flash memory disks, instead of the laptop, 2.5" disks used on older models. This wiki page contains some notes descr...)
 
(Old description)
 
(13 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
 
== SMR Flash Disk Cloning ==
 
== SMR Flash Disk Cloning ==
  
 +
=== 2012 version with Xubuntu 12.04===
  
Some of the SMR's now have solid-state flash memory disks, instead of the laptop, 2.5" disks used on older models.
+
====Clone image to (new) disk====
 
+
This wiki page contains some notes describing how to write a bootable flash disk image (Slackware Linux) to a memory card. It assumes a Linux PC with USB flash card reader/writer, available as /dev/sda.
+
 
+
The commands below is implemented in this script Clone script. Usage:
+
 
+
clone <from_file.tar.gz> <to device>
+
<to device> can be both the USB bus (/dev/sdx) or a IDE device (/dev/hdx)
+
 
+
The script will place a file .cloned-at on the Flash Disk with time information for the cloning.
+
 
+
If you put the Flash Disk on the IDE bus and the computer will not boot (LILO - Timestamp mismatch) then the MBR on the Flash Disk must be erased as follows:
+
 
+
dd if=/dev/zero of=/dev/hdx bs=1 count=512
+
Writing an image
+
 
+
Format the disk, with one large Linux partition:
+
 
+
sfdisk -L /dev/sda <<EOF
+
,,L,*
+
EOF
+
Create a filesystem:
+
 
+
mke2fs /dev/sda1 -L /
+
Mount the new, empty partition:
+
 
+
mkdir -p /tmp/u
+
mount /dev/sda1 /tmp/u
+
Write a previously created image from flash.tar.gz
+
 
+
zcat flash.tar.gz |
+
tar --extract --file - --directory /tmp/u --preserve-permissions
+
Create a patched lilo.conf, so that we can run LILO with the flash card mounted via USB. (This won't be necessary if the image written above already contains such a file.)
+
  
patch -o /tmp/u/etc/lilo_usb.conf /tmp/u/etc/lilo.conf <<EOF
+
Make a new bootable disk from existing image:
*** /tmp/u/etc/lilo.conf        Tue Nov  4 21:34:44 2003
+
--- lilo_usb.conf      Thu Dec 11 11:50:55 2003
+
***************
+
*** 4,6 ****
+
  # Start LILO global section
+
! boot = /dev/hda
+
  message = /boot/boot_message.txt
+
--- 4,7 ----
+
  # Start LILO global section
+
! boot = /dev/sda
+
! disk = /dev/sda bios=0x80
+
  message = /boot/boot_message.txt
+
EOF
+
Run LILO:
+
  
chroot /tmp/u lilo -v -C /etc/lilo_usb.conf
+
Use '''clone-xubuntu''' and '''clone-databar''' on smr24 (room 011) as root in /root, where available images are in the ''images'' subdirectory.
All done:
+
  
umount /dev/sda1
+
====Make new boot image====
eject /dev/sda
+
Reading an image
+
  
Mount as above:
+
Update image on one of the 4GB sticks, then make new imagefile
  
  mkdir -p /tmp/u
+
* put 4GB stick on another linux (with GRUP installed)
  mount /dev/sda1 /tmp/u
+
* mount the disk on a local directory as root, e.g.:
Read the partition:
+
sudo bash
 +
  mkdir -p disk
 +
  mount /dev/sdb1 disk
 +
* copy everything on disk to an image file (it takes several minutes):
 +
cd disk
 +
tar -czf ../image/smrXubuntu20120715.tar.gz *
 +
cd ..
 +
umount disk
  
tar --create --file - --directory /tmp/u --one-file-system --exclude lost+found . |
 
gzip > flash.tar.gz
 
or
 
  
tar -zcf - -C /tmp/u --one-file-system --exclude lost+found . > flash.tar.gz
+
==Old description==
All done:
+
  
umount /dev/sda1
+
[[old disk cloning procedure]]
eject /dev/sda
+

Latest revision as of 10:33, 29 August 2012

Contents

[edit] SMR Flash Disk Cloning

[edit] 2012 version with Xubuntu 12.04

[edit] Clone image to (new) disk

Make a new bootable disk from existing image:

Use clone-xubuntu and clone-databar on smr24 (room 011) as root in /root, where available images are in the images subdirectory.

[edit] Make new boot image

Update image on one of the 4GB sticks, then make new imagefile

  • put 4GB stick on another linux (with GRUP installed)
  • mount the disk on a local directory as root, e.g.:
sudo bash
mkdir -p disk
mount /dev/sdb1 disk
  • copy everything on disk to an image file (it takes several minutes):
cd disk
tar -czf ../image/smrXubuntu20120715.tar.gz *
cd ..
umount disk


[edit] Old description

old disk cloning procedure

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox