ASTA pool
From Rsewiki
(Difference between revisions)
(→Filer maintenance) |
|||
| Line 32: | Line 32: | ||
2. Mount the exces pipe. | 2. Mount the exces pipe. | ||
| + | |||
| + | [[File:drain_pipe.jpeg | 150px]] | ||
| + | [[File:drain_pipe_mounted.jpeg | 150px]] | ||
| + | [[File:drain_pipe_open.jpeg | 150px]] | ||
| + | |||
| + | 2.1 The drain needs to be opened, just pull the cover off (2 hands, mind your bag). | ||
| + | |||
| + | 2.2 Take the drain pipe and mount it. | ||
| + | |||
| + | 2.3 Open the valve. | ||
Revision as of 17:25, 18 June 2020
Back to ASTA
Contents |
Description
6m long, 3.5m wide and 3m deep (when filled) (photo Michael Cole)
Salinity zero and no chloride, so be careful not to contaminate.
Cover
Not installed yet
Water flow control
Not fully operational yet (power control missing)
Filer maintenance
Access the filter sysem by opening the hatch.
The filter needs to be cleaned about every month. When the pressure approaches the red area it is time to clean.
1. Start by turning off the filter pump.
2. Mount the exces pipe.
2.1 The drain needs to be opened, just pull the cover off (2 hands, mind your bag).
2.2 Take the drain pipe and mount it.
2.3 Open the valve.
