Fieldrobot

From Rsewiki
(Difference between revisions)
Jump to: navigation, search
Line 32: Line 32:
 
[[image:Blacrubbermatentrance.jpg|400px|center]]
 
[[image:Blacrubbermatentrance.jpg|400px|center]]
  
På sort måtte i mellemgangen:0.6kg*0,137 m * 10 N/kg=0.822Nm
+
On black rubber mat in the entrance:0.6kg*0,137 m * 10 N/kg=0.822Nm
  
 
[[image:Blackgrateoutdoor.jpg|400px|center]]
 
[[image:Blackgrateoutdoor.jpg|400px|center]]
  
På risten udenfor:1.0kg*0,137 m * 10 N/kg=1.37Nm
+
On grate outdoors:1.0kg*0,137 m * 10 N/kg=1.37Nm
  
 
[[image:cobblestoneoutdoor.jpg|400px|center]]
 
[[image:cobblestoneoutdoor.jpg|400px|center]]
  
På fliser udenfor:1.0kg*0,137 m * 10 N/kg=1.37 Nm
+
On cobblestone outdoors:1.0kg*0,137 m * 10 N/kg=1.37 Nm
  
 
[[image:grassoutdoor.jpg|400px|center]]
 
[[image:grassoutdoor.jpg|400px|center]]
  
På græs udenfor:1.4kg*0,137 m * 10 N/kg=1,918 Nm
+
On grass outdoors:1.4kg*0,137 m * 10 N/kg=1,918 Nm
  
 
[[image:dirtoutdoor.jpg|400px|center]]
 
[[image:dirtoutdoor.jpg|400px|center]]
På jord udenfor: 0,7 kg*0,137 m * 10 N/kg=1 Nm
+
 
 +
On dirt outdoors: 0,7 kg*0,137 m * 10 N/kg=1 Nm
  
 
Alle målinger er lavet med en vandring på minimum 90 grader hvoraf den højeste værdi er brugt.
 
Alle målinger er lavet med en vandring på minimum 90 grader hvoraf den højeste værdi er brugt.

Revision as of 09:53, 11 September 2013

This page holds information about the Fieldrobot (Markrobot in danish)

Contents

Hardware

Gearing

There are 3 different types of gearing which can be changed by replacing the timing belt from the planetary gear to the wheel axel.The gearing can be 1:1, 1:1.5 or 1:2 (or in absolute values: 28:28, 19:28 and 14:28). The planetary gearbox has a gearing of 1:12.

The combination of timing belt length and teeth on the gears is:

Right side:

Gearing 19:28 timing belt length: 250 mm.

Gearing 28:28 timing belt length: 270 mm.

Gearing 14:28 timing belt length: 240 mm.

Left side:

Gearing 19:28 timing belt length: 260 mm.

Gearing 28:28 timing belt length: 280 mm.

Gearing 14:28 timing belt length: 245 mm.

Torque needed at front wheels to turn them

Maximum is on grass and needs a torque of 2 Nm

The measurements are as follows:

Blackfloorentrance.jpg

Black floor in the entrance:0.4kg*0,137 m * 10 N/kg=0,55Nm

Blacrubbermatentrance.jpg

On black rubber mat in the entrance:0.6kg*0,137 m * 10 N/kg=0.822Nm

Blackgrateoutdoor.jpg

On grate outdoors:1.0kg*0,137 m * 10 N/kg=1.37Nm

Cobblestoneoutdoor.jpg

On cobblestone outdoors:1.0kg*0,137 m * 10 N/kg=1.37 Nm

Grassoutdoor.jpg

On grass outdoors:1.4kg*0,137 m * 10 N/kg=1,918 Nm

Dirtoutdoor.jpg

On dirt outdoors: 0,7 kg*0,137 m * 10 N/kg=1 Nm

Alle målinger er lavet med en vandring på minimum 90 grader hvoraf den højeste værdi er brugt.

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox