Visual Tracking on Pixhawk
From Rsewiki
(Difference between revisions)
| Line 12: | Line 12: | ||
==== Default Pixhawk Firmware === | ==== Default Pixhawk Firmware === | ||
For instructions on setting up the required tool chain and building the standard Pixhawk firmware, | For instructions on setting up the required tool chain and building the standard Pixhawk firmware, | ||
| − | follow the tutorial at [http://dev.px4.io/starting-installing.html] | + | follow the tutorial at [http://dev.px4.io/starting-installing.html|dev.px4.io/start-installing.html] |
Revision as of 14:01, 22 January 2016
Contents |
System Overview
The tracker consists of:
- A quarotor equipped with a Pixhawk, the Drone
- A linux computer connected to a
- HD webcam, and
- 3DR telemetry radio.
- Software running on the linux computer for tracking the drone, and sending the position over the telemetry link
- Modified Pixhawk firmware with sensors added to the ekf2 module
Installation Instructions
Pixhawk
= Default Pixhawk Firmware
For instructions on setting up the required tool chain and building the standard Pixhawk firmware, follow the tutorial at [1]
Important notes
Changes in files not concerning the EKF
The following files have been changed, to enable Mikrokopter BL-CTRL motor drivers and ultrasonic rangefinder:
cmake/configs/nuttx_px4fmu-v2_default.cmake
in the process the ekf2 module was added to the build list along with the useful tool listener.
To free up some space, some unused modules were commented out of the build list.
