UASTA
From Rsewiki
(Difference between revisions)
(→Usage) |
(→Usage) |
||
| Line 24: | Line 24: | ||
<code> rviz </code> | <code> rviz </code> | ||
| + | |||
| + | * Run you code in Simulink | ||
=== uASTA with Optitrack (motion capture system) === | === uASTA with Optitrack (motion capture system) === | ||
| + | |||
| + | N = number that identifies your Crazyflie | ||
| + | |||
| + | * Start a ROS server for your Crazyflie: | ||
| + | |||
| + | <code> cfstart N </code> | ||
| + | |||
| + | * Check the current level of the battery (it should be above 3.8): | ||
| + | |||
| + | <code> battery </code> | ||
| + | |||
| + | * Start an Optitrack server for you Crazyflie: | ||
| + | |||
| + | <code> optitrack N </code> | ||
| + | |||
| + | Troubleshooting: the markers mounted on your Crazyflied have to be registered as a rigid body called cfN (e.g., cf12) on the Optitrack computer in the central cabin. See [[ASTA_motion_capture]] for more information. | ||
| + | |||
| + | * Check that the position estimate is stable in RViZ: | ||
| + | |||
| + | <code> rviz </code> | ||
| + | |||
| + | * Run you code in Simulink | ||
Revision as of 17:08, 15 June 2021
Contents |
Installations
...
Usage
uASTA with Loco Positioning System (ultra-wide band)
N = number that identifies your Crazyflie
- Start a ROS server for your Crazyflie:
cfstart N
- Check the current level of the battery (it should be above 3.8):
battery
- Check that the position estimate is stable in RViZ:
rviz
- Run you code in Simulink
uASTA with Optitrack (motion capture system)
N = number that identifies your Crazyflie
- Start a ROS server for your Crazyflie:
cfstart N
- Check the current level of the battery (it should be above 3.8):
battery
- Start an Optitrack server for you Crazyflie:
optitrack N
Troubleshooting: the markers mounted on your Crazyflied have to be registered as a rigid body called cfN (e.g., cf12) on the Optitrack computer in the central cabin. See ASTA_motion_capture for more information.
- Check that the position estimate is stable in RViZ:
rviz
- Run you code in Simulink
