Raspberry and ROS
From Rsewiki
Back to Robobot
Contents |
Do not use for now
Install Raspberry
Use Raspberry pi imager (download from https://www.raspberrypi.com/software/)
rpi-imager
Select operating system Ubuntu (22.04 64 bit for now) and storage, an empty SD-flash of at least 16GB, then write.
When finished mount the SD into the Raspberry
Start Raspberry
Need a screen and keyboard (mouse not needed) Connect to the network for updating and date/time.
Use the English language Give a username and password
user: local, password:(ask)
Stop the graphical user interface (to save memory)
systemctl set-default multy-user.target reboot
Allow Ubuntu to update - it takes a rather long time, as a PI3 has got limited RAM.
SSH
Install openssh-server and sshfs
sudo apt install openssh-server sshfs
find your IP address using
ifconfig
Clone the just installed image
Use SD card copier (on Raspberry??)
