Install GUI-less UBUNTU

Revision as of 15:39, 6 July 2012

Introduction

This guide is a guide to install UBUNTU on a robot almost without GUI.

Most is changed to log the installation of xubuntu 12.04 on a 4GB disk for SMRs, where the GUI (lightdm) just is disabled.

NB!

RTAI installation requires patching and recompiling the kernel, and the pt newest patch requires kernel version 2.6.32.11. This kernel did not compile out-of-the-box, and is postponed, as the rest of the system is from ubuntu version 11.10 with kernel version 3.0.0.15, and is therefore likely to not be compatible with kernel 2.6.32.

Project stalled (30 jan 2012) Christian

UBUNTU installation

Disk space of at least 4GB is needed, internet access for use during installation and a connected CD-drive for the initial boot.

The installation follows in general the guide in: https://help.ubuntu.com/community/Installation/LowMemorySystems

Make a UBUNTU 11.10 minimal from the page https://help.ubuntu.com/community/Installation/MinimalCD Select the x86 32bit version of ubuntu 11.10 (mobotware do not support 64bit yet)

Installed with the following selections:

• local user selected as "demo", do not use one you want to use over the network.
• Installed on entire disk (160GB and 2GB swap - swap should later be removed and disk image reduced to 4 or 8 GB)
• Language: English (UK)
• Time: UTM with local time beeing København

When asked for packages to install, just install (i.e. no GUI):

• server basis
• ssh server

Then finish and reboot.

After reboot, the default virtual screen is 7 (the not installed GUI screen), switch to virtual screen 1 by Ctrl-Alt-F1 (we will fix this later).

Login at the prompt.

install packages

Install packages like:

sudo apt-get install cmake

UBUNTU packages

Install also the following packages:

• cmake
• gcc
• g++
• make
• ncurses-dev
• libcv-dev
• libraw1394-dev (used by camera server)
• not libdc1394-dev (used by camera server)
• isOK libpng-dev (used by camera server)
• isOK libexpat-dev
• pciutils-dev
• libreadline-dev
• isOK bison (used by MRC)
• libudev-dev
• libv4l-dev (used by camera server video 4 linux 2)
• isOK pkg-config
• autofs (to mount users home-dir)
• nis (for shared files - askes for a domain while installing)
• isOK gdb (to be able to analyse e.g. core dumps)
• valgrind (to analyse for memory leaks etc.)
• apache2 (to get default web access to robot - using MARG)
• isOK lsof (to track open files - also device files)
• ssh (ssh server)
• sox (to play a waw file)
• flite (to play a text string)
• libusb-dev (mainly for kinect)
• libusb-1.0-0-dev (mainly for kinect)
• libboost-dev (for some AURS plugins)
• localepurge (maintaining only en_UK locale files)
• ntp (to time sync clock on robot)

removed the following packages:

• firefox
• xfburn
• games (mahjongg, mine, suduko, aislerion, gnome-games)
• gimp
• thunderbird
• xchat
• parole
• gmusicbrowser
• abiword
• calender
• aspell
• gcalc
• transmission
• pidgin
• dictionary

(saved about 210 MB)

- installed on smr10 (xubuntu-12.04) / jca

LIBUSB

Download libusb (need to be a vesion newer than 1.0.0) from http://sourceforge.net/projects/libusb/files/libusb-1.0/

unpack and in the unpacked directory:

./configure
make
sudo make install

PCL

Add PCL repository to source list by adding this line to /etc/apt/sources.list

deb http://ppa.launchpad.net/v-launchpad-jochen-sprickerhof-de/pcl/ubuntu maverick main

then get new package list and install PCL like:

sudo apt-get update
sudo apt-get install libpcl-all

Configure for kalman log-in

Copied

/etc/hosts.allow
/etc/hosts.deny
/etc/auto.master  (NB! these auto* files must NOT be executable)
/etc/auto.misc

from Bode

Make links for home directories (NB! do NOT: sudo mkdir /misc)

sudo ln -s /misc/vhome /vhome
sudo ln -s /misc/shome /shome

Environment variables

The bin path for mobotware is added to /etc/environment, so that it now reads

PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/smr/bin"

The library path can not be added to /etc/environment, but is added as /etc/ld.so.conf.d/mobotware.conf as

/usr/local/smr/lib

But this do not work, so you must still add to your .bashrc file (sorry):

export LD_LIBRARY_PATH  

If you want it to look elsewhere for applications and plugins, then redefine in your .bashrc file, e.g. if you want to add a version of mobotware in /shome/ex22/mobotware/build/bin (applications) and /shome/ex22/mobotware/build/lib (plugins), add the following lines to ./bashrc in your home directory:

# file ./bashrc
export PATH="/shome/ex22/mobotware/build/bin:$PATH"
export LD_LIBRARY_PATH="/shome/ex22/mobotware/build/lib"

NIS start and switch

NIS start by default, when any network is up and running, this does not work if wireless is used.

So edit /etc/init/ypbind.conf

change

start on (started portmap ON_BOOT=
      or (started portmap ON_BOOT=y
      and ((filesystem and static-network-up) or failsafe-boot)))

to

start on (started portmap ON_BOOT=
      or (started portmap ON_BOOT=y
      and ((filesystem and net-device-up IFACE=wlan0) or failsafe-boot)))

and change 3 lines in /etc/nsswitch, add nis as first option

...
passwd:         nis compat
group:          nis compat
shadow:         nis compat
...

Reboot when both changes are in place (if nsswitch is changed only, it is likely that login will be impossible due to long timeouts. then use failsafe boot and root shell to recover, (remember: mount -n -o remount,rw /).

Compile mobotware on new platform

!!!This section is not relevant anymore!!!

The parts of mobotware that depend on openCV-highgui will not compile, so remove them from the respective Makefiles:

From aurobotservers/trunk/src/Makefile edit 'apps=' list from

apps = auclient  auservertest  ucamserver  uclient  ulmsserver  userver  

to

apps = auservertest  ucamserver  ulmsserver  userver  

And in aurobotservers/trunk/plugin/Makefile edit 'plugins=' list to remove 'audisp'

And in aurobotservers/trunk/utils/Makefile cange

APPSUBDIRS = mapoffset smrcllogtrim cameracalibrate aulogrotate \
            barcode2d stereocalibrate utmpose2kml bayer2rgb

to

APPSUBDIRS = mapoffset smrcllogtrim  aulogrotate \
            barcode2d  utmpose2kml 

The package should now compile? - or at least the aurobotservers

ROS

- ikke testet endnu

WEB server - MARG

With the apache server installed MARG can be active (java is not needed on this platform)

The apache server has its root in '/var/www', but to be compatible with other platforms, links are made from the /srv directory:

sudo ln -s /var/www /srv/httpd
sudo ln -s /var/www /srv/www

And a directory for the aukeeper is needed, like

sudo mkdir /var/log/keeper

Switchtool

Switchtool consist of /etc/rc.smr, and this directory holds 2 files rc.smr and rc.smr_shutdown.

These are copied from old installation:

/etc/rc.smr/rc.smr:

#!/bin/bash
/usr/local/smr/bin/rhd /usr/local/smr/bin/rhdconfig/rhdconfig.smrS1.xml&
export LD_LIBRARY_PATH="/usr/local/smr/lib:/usr/local/smr/aurs/lib"
/usr/local/smr/bin/aukeeper -a -s /usr/local/smr/bin/aursconf/aukeeper.ini > /dev/null &
cp /usr/local/smr/marg/robot.xml /srv/httpd/htdocs/robot.xml
SMRHN=`hostname`
sed -i "s/smrhost/$SMRHN/g" /srv/httpd/htdocs/robot.xml
exit 0

/etc/rc.smr/rc.smr_shutdown:

#!/bin/bash
killall -q rhd
pkill keeper
pkill ulmsserver
pkill ucamserver
pkill keeper
echo "Mobotware shutdown"
exit 0

Then /etc/rc.local should be modified to load default configuration. This is also taken from old configuration (in /etc/rc.d/rc.local), add the following lines:

/etc/rc.local:

# Set standard sound level
amixer set Master 80% unmute
amixer set PCM 80% unmute 
# start default configuration
/etc/rc.smr/rc.smr
sleep 1

Then the switchtool (a bash script) is copied from old configuration to /usr/sbin/ - looks pt like this:

/usr/sbin/switchtool:

#!/bin/bash
dir_name="/misc/opt/smr.${1}"
if [ -z ${1} ]; then
       if [ ! -d /usr/local/smr.net/bin ]; then
               echo "Switching impossible. Kalman /opt not found."
               exit 1
       fi
elif [ "${1}" != "local" ]; then
       if [ ! -d $dir_name/bin ]; then
               echo "Switching impossible. Path: ${dir_name} not found."
               exit 2
       fi
fi
if [ ! -x /etc/rc.smr/rc.smr_shutdown ]; then
       echo "Warning: Smr startup scripts not found. Is this a robot ?"
else
       /etc/rc.smr/rc.smr_shutdown
fi
if [ -z ${1} ]; then
       echo "Switching to production mode"
       rm -f /usr/local/smr
       ln -sf /usr/local/smr.net /usr/local/smr
elif [ "${1}" == "local" ]; then
       echo "Switching to local mode"
       rm -f /usr/local/smr
       ln -sf /usr/local/smr.local /usr/local/smr
else
       echo "Switching to ${1} mode"
       rm -f /usr/local/smr
       ln -sf $dir_name /usr/local/smr
fi
if [ -x /etc/rc.smr/rc.smr ]; then
       /etc/rc.smr/rc.smr
fi
sleep 2
echo "done"
exit 0

mangler også

- lyd - test med smr og kran