Robobot hardware
From Rsewiki
(Difference between revisions)
(Created page with "Back to Robobot B ==Hardware== 400px The hardware is 3D-printed plastic (except for the electronics and screws) All 3D printed parts...") |
(→Hardware) |
||
| Line 7: | Line 7: | ||
The hardware is 3D-printed plastic (except for the electronics and screws) | The hardware is 3D-printed plastic (except for the electronics and screws) | ||
| − | All 3D printed parts have holes for mounting additional parts. These holes | + | All 3D printed parts have holes for mounting additional parts. These holes have: |
| − | * Individual distance of 1cm | + | * Individual hole distance of 1cm |
| − | * | + | * Hole diameter of 2.5mm, intended for 3mm plastic screws. |
* Plastic thickness is 6mm in most cases. | * Plastic thickness is 6mm in most cases. | ||
Revision as of 12:36, 22 October 2023
Back to Robobot B
Hardware
The hardware is 3D-printed plastic (except for the electronics and screws)
All 3D printed parts have holes for mounting additional parts. These holes have:
- Individual hole distance of 1cm
- Hole diameter of 2.5mm, intended for 3mm plastic screws.
- Plastic thickness is 6mm in most cases.
