Robobot hardware

From Rsewiki

Revision as of 12:36, 22 October 2023 by Jca (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Back to Robobot B

Hardware

The hardware is 3D-printed plastic (except for the electronics and screws)

All 3D printed parts have holes for mounting additional parts. These holes has:

Individual distance of 1cm
Whole diameter of 2.5mm, intended for 3mm plastic screws.
Plastic thickness is 6mm in most cases.

Retrieved from "http://rsewiki.elektro.dtu.dk/index.php?title=Robobot_hardware&oldid=6445"

Personal tools

Log in

Toolbox