TerrainHopper
From Rsewiki
(Difference between revisions)
(→Main computer) |
(→WiFi) |
||
| Line 63: | Line 63: | ||
Netplan merges the two configuration files, seems to work fine, except wifi. | Netplan merges the two configuration files, seems to work fine, except wifi. | ||
| − | To start the netplan, this command | + | To start the netplan, this command seems to help: |
sudo netplan try | sudo netplan try | ||
Latest revision as of 13:29, 17 February 2023
Documentation for modifications and use of TerrainHopper vehicle
Contents |
[edit] Interfaces
Description of the Wheel encoder and RHD plugin
[edit] Motor velocity control
Remote control
Velocity control through RHD plugin (todo).
[edit] Power distribution
power and other drawings
[edit] UR5 interconnection
Power, gripper and camera
[edit] Main computer
Ubuntu 18.04 installation
[edit] WiFi
Not connected to "WaveLAN IAU"
Switched to netplan, interface with cable OK
Using these two files
/etc/netplan/05-netplan-rj45.yaml
network:
version: 2
renderer: networkd
ethernets:
enp0s31f6:
dhcp4: true
enp3s0:
addresses:
- 192.168.0.210/24
optional: true
/etc/netplan/08-netplan-wifi.yaml
network:
version: 2
# renderer: networkd
ethernets:
enp0s31f6:
addresses: [ 192.168.2.2/24 ]
wifis:
wlp1s0:
dhcp4: yes
access-points:
"WaveLAN IAU":
password: ""
optional: true
Netplan merges the two configuration files, seems to work fine, except wifi.
To start the netplan, this command seems to help:
sudo netplan try
[edit] Can bus
Not working off the shelf
Installed CAN viewer (uavcan_gui_tool) from page https://uavcan.org/GUI_Tool/Overview/#linux
sudo apt-get install -y python3-pip python3-setuptools python3-wheel sudo apt-get install -y python3-numpy python3-pyqt5 python3-pyqt5.qtsvg git-core sudo pip3 install git+https://github.com/UAVCAN/gui_tool@master $ uavcan_gui_tool
[edit] Steering
Hardware redesign for improved steering with less slag.
