Robot GUI (MARG)

From Rsewiki
(Difference between revisions)
Jump to: navigation, search
(→‎startserver)
(→‎startserver)
Line 262: Line 262:
 
  else
 
  else
 
   serverName=$1
 
   serverName=$1
−
#  echo starting a "$serverName"
 
−
#  if [ ! -x "$serverName" ]
 
−
#  then
 
−
#    echo executable "$serverName" not found
 
−
#  fi
 
 
   # if assumed dead process is still running, then kill it
 
   # if assumed dead process is still running, then kill it
 
   if [ $( pgrep -x "$serverName" ) ]
 
   if [ $( pgrep -x "$serverName" ) ]

Revision as of 19:42, 28 January 2011

MARG (Mobile Autonomous Robot GUI) is a java applet intended as a graphical user interface for Mobotware robots, but all intended features are not implemented yet.

At present MARG is used for hardware test for SMR robots.

Contents

How to use

Start a web browser, and in the address field type the name of the SMR, e.g.: 

smr3.iau.dtu.dk

The java applet wil be loaded (you may be asked to accept to run this applet).

Marg-start.png

Figure 1: Start image when MARG is loaded (shown for smr3)

TEST hardware

Start the MARG as described above.

Three set of hardware can be tested:

  • Linesensor, IR-sensor, and wheel control
  • camera
  • laserscanner

Linesensor, IR-sensor, wheel control

Select RHD module and SMR-tab:

The line-sensor and IR-sensor should now update (once every second).

The wheel control can be tested by moving the slider below the left and right wheel symbol.

Marg-smr.png

Figure 2: Graphic monitoring of linesensor, IR-sensor and wheel control.

Further data can be evaluated on the Variables tab where there is a rhd-folder with all RHD data. Press Update to refresh the values.

Camera

Select the camera module (1) and press the connect button (2) (as shown on image).

This should change the camera button to green. Then type push cmd="imageget" in the field (3) 

push cmd="imageget"

Press the send button (4) - or hit return.

A list of data should appear in the raw data field, with one new line every second, something like: 

... <push done="true"></push>
-> push cmd="imageget"
<imageget x="0" y="0" w="0" h="0" format="BGR" remRad="false" dev="10" imgTod="1281613399.200692" posName="" pool="0"></imageget>
<imageget x="0" y="0" w="0" h="0" format="BGR" remRad="false" dev="10" imgTod="1281613400.182666" posName="" pool="0"></imageget>
<imageget x="0" y="0" w="0" h="0" format="BGR" remRad="false" dev="10" imgTod="1281613401.164516" posName="" pool="0"></imageget>
<imageget x="0" y="0" w="0" h="0" format="BGR" remRad="false" dev="10" imgTod="1281613402.146366" posName="" pool="0"></imageget>
<imageget x="0" y="0" w="0" h="0" format="BGR" ...

The camera image itself will not be shown (not implemented).

Marg-cam1.png

Figure 3: Camera server access for test of camera device.

Laser scanner

Select the laser module (1) and press the connect button (2) (as shown on image).

This should change the laser button to green. Then type push cmd="scanget" in the field (3) 

push cmd="scanget"

Press the send button (4) - or hit return.

A list of data should appear in the raw data field, with one new block every second, something like: 

... 
-> push cmd="scanget"
<push done="true"></push>
<scanget serial="1" interval="0.351562" count="682" tod="1281613992.348607" unit="mm" min="-119.88" max="119.53" codec="HEX">
<pose name="robot" x="0.000" y="0.000" h="0.000"></pose>
<pos3d x="0.2" y="0" z="0.05" name="device"></pos3d>
<rot3d name="device" Omega="0" Phi="0" Kappa="0"></rot3d>
<bin size="2728" codec="HEX">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</bin>
</scanget>
<scanget serial="3" interval="0.351562" count="682" tod="1281613992.744879" unit="mm" min="-119.88" max="119.53" codec="HEX">
<pose name="robot" x="0.000" y="0.000" h="0.000"></pose>
<pos3d x="0.2" y="0" z="0.05" name="device"></pos3d>
<rot3d name="device" Omega="0" Phi="0" Kappa="0"></rot3d>
<bin size="2728" codec="HEX">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</bin>
</scanget>

Marg-laser1.png

Figure 4: Access to laser scanner server and data from the laser scanner.

How it works

The MARG support has tree elements

  • The java applet shown in the browser
  • An AURS server providing the data support
  • An entry in the boot script file.

Java applet

The java applet is loaded as the default apache home-page on the robot. The files are located at: 

/srv/httpd/htdocs/
    index.html
    robot.xml
    dist/
      marg2.jar


The index.html specifies where to start in the java file marg2.jar. The robot.xml specifies how marg is configured with modules and other options.

The applet contacts a AURS server on port 24926. This server is the interface point to the Mobotware, and handles in addition the interface to RHD. This module is thus called RHD.

The laser and camera modules may contact laser scanner server and the camera server, once these are running.

The marg2.jar is actually a symbolic link pointing to /usr/local/smr/marg/marg2.jar (and the file is thus on kalman/opt/smr/marg/marg2.jar).

The robot.xml file is on the reboot copied from /usr/local/smr/marg/robot.xml and modified to the actual hostname (using a sed command in /etc/rc.d/rc.local)

The source code for the MARG applet is on the timmy.elektro.dtu.dk SVN, as the rest of the Mobotware, in a marg directory.

AURS server

The interface point for MARG is a AURS server called aukeeper, The configuration for this server is saved on the robot as follows: 

/root/keeper/
   aukeeper.ini            configuration of aukeeper on port 24926     
   ucamserver.ini          configuration of camera server when started by aukeeper
   ulmsserver.ini          configuration of laser server when started by aukeeper
   keepucamserver.rule     rule to start and stop camera server when needed
   keeplmsserver.rule      rule to start and stop laser server when needed
   connectrhd.rule         rule to start and stop connection to RHD
   startserver             bash script to (re)start laser or camera server

The aukeeper rules activates when it detects a client (MARG), and then connects to RHD and starts the camera and laser server. When the client (MARG) disconnects (browser window is closed), then the laser and camera server is closed and the connection to RDH is terminated. This configuration is the same for all robots.

The aukeeper itself is started in /etc/rc.d/rc.local on boot.

BOOT script

The MARG support is started on robot boot as a part of the /etc/rc.smr/rc.smr script, as follows: 

#!/bin/bash
# start rhd
/usr/local/smr/bin/rhd /usr/local/smr/bin/rhdconfig/rhdconfig.smrS1.xml&
# start keeper - to provide data to MARG
export LD_LIBRARY_PATH="/usr/local/smr/lib:/usr/local/smr/aurs/lib"
/usr/local/smr/bin/aukeeper /usr/local/smr/bin/aursconf/aukeeper.ini > /var/log/keeper_out &
# get MARG startup-file, and modify hostname
cp /usr/local/smr/marg/robot.xml /srv/httpd/htdocs/robot.xml
SMRHN=`hostname`
sed -i "s/smrhost/$SMRHN.iau.dtu.dk/g" /srv/httpd/htdocs/robot.xml
exit 0

The MARG configuration file robot.xml is copied to a local file in the apache directory /srv/httpd/htdocs/robot.xml and modified with the actual hostname using the string edit command sed

robot.xml

The MARG configuration file may look like this 

<?xml version="1.0" encoding="UTF-8"?>
<robot>
   <name>smrhost</name>
   <module>
       <name>camera</name>
       <host>smrhost</host>
       <port>24920</port>
       <autoConnect>true</autoConnect>
   </module>
   <module>
       <name>laser</name>
       <host>smrhost</host>
       <port>24919</port>
       <autoConnect>true</autoConnect>
   </module>
   <module>
       <name>RHD</name>
       <host>smrhost</host>
       <port>24926</port>
       <plugin>SMRPlugin</plugin>
       <autoConnect>true</autoConnect>
   </module>
   <controlButtons>
       <start moduleName="RHD" command="push cmd='var allcopy'"/>
       <pause moduleName="RHD" command="push flush"/>
       <stop moduleName="RHD" command="push flush"/>
   </controlButtons>
   <watch moduleName="RHD" watch="odopose.pose" okMin="-1000" okMax="1000"/>
</robot>


Keeper files

The keeper is the application running at startup keepint the needed applications running as needed. (and restarting if they crash). The aukeeper.ini could look like this: 

# open server - port and path
server port=24926
module load='var'
server imagepath="/var/log"
server datapath="/var/log"
# load RHD interface
module load="aurhdif.so.0"
rhd hup
rhd host=localhost:24902
# cam
module load="if" alias=cam
var cam.runAliveTest=true
cam connect=localhost:24920
camonconnect cmd="cam push t=4 imageget"
camonconnect cmd="cam push t=3 cmd='var allcopy'"
#laser
module load="if" alias=laser
var laser.runAliveTest=true
laser connect=localhost:24919
laseronconnect cmd="laser push t=5 scanget"
laseronconnect cmd="laser push t=3 cmd='var allcopy'"
# start rules
module load="aurule.so.0"
rule log=false
rule load="/usr/local/smr/bin/aursconf/keepucamserver.rule"
rule load="/usr/local/smr/bin/aursconf/keeplmsserver.rule"
rule load="/usr/local/smr/bin/aursconf/connectrhd.rule"
rule resume
startserver

The keeper further needs a script to start the servers: 

#! /bin/bash
if [ $# -eq 0 ]
then
  echo
  echo Start a nev version of the server in 1st parameter
  echo use with at least one parameter, like:
  echo  $  startserver ucamserver
  echo  $  startserver ulmsserver
  echo  $  startserver auclientnox -p 24928
  echo 
else
  serverName=$1
  # if assumed dead process is still running, then kill it
  if [ $( pgrep -x "$serverName" ) ]
  then
    echo trying to terminate "$serverName"
    killall "$serverName" > /dev/null
      echo zzz 1...
    sleep 0.7
    if [ $( pgrep -x "$serverName" ) ]
    then
      echo zzzzzzz 2...
      sleep 2.5
    fi
    if [ $( pgrep -x "$serverName" ) ]
    then
      echo zzzzzzzzzzzzzz 3...
      sleep 7
    fi
    if [ $( pgrep -x "$serverName" ) ]
    then
      echo trying to 9 kill "$serverName"
      killall -9 "$serverName" > /dev/null
      echo "$serverName" killed
    else
      echo "$serverName" terminated
    fi
  fi
#  aulogrotate "$serverName"_out
#  aulogrotate "$serverName"_err
  /usr/local/smr/aurs/"$serverName" -s /usr/local/smr/bin/aursconf/"$servername".ini -a $2 $3 $4 >  "$serverName"_out 2> "$serverName"_err &
  echo started /usr/local/smr/bin/"$serverName" -s /usr/local/smr/bin/aursconf/"$servername".ini -a $2 $3 $4
fi
connectrhd.rule
<?xml version="1.0" ?>
<rule name="connectrhd" if="defined('rhd.connected')">
 <description>
   trying to keep write connection to rhd
   port 24902
 </description>
 <init>
 global.alive.rhd = false
 <rule name="rhdconnect" if="not rhd.connected and
                             core.clients > 0 and
                             not global.alive.rhd">
    global.alive.rhd = true
    print("Connecting to rhd (write)")
    core.send("rhd connect write")
 </rule>
 <rule name="rhdhup" if="rhd.connected and
                         core.clients == 0 and
                         global.alive.rhd">
    global.alive.rhd = false
    print("disconnecting rhd")
    core.send("rhd hup")
 </rule>
 </init>
 print("Started rhd write connect")
 wait() : false
</rule>
keeplmsserver.rule
<?xml version="1.0" ?>
<rule name="keeplmsserver" if="defined('laser.connected')">
 <description>
   trying to keep laser server running, when a client is on the keeper server
   * ulmsserver on port 24919
   running
 </description>
 <init>
 global.alive.laser = false
 global.alive.laserStarted = false
 allow = 7  # allow time is allowed time to be dead
 deadCnt = allow + 1
 <rule name="alive" if="laser.connected and 
                        laser.hostalive and 
                        not global.alive.laser">
    global.alive.laser = true
    print("laser is alive after " deadCnt " secs to start")
    deadCnt = 0
    allow = 3  # seen alive to dead detect
 </rule>
 <rule name="deadCnt" if="not laser.connected or not laser.hostalive">
    if (deadCnt < 0.51)
      print("laser seems to be dying " deadCnt " : laser.connected=" laser.connected ", laser.alive=" laser.hostalive)
    deadCnt = deadCnt + rulestate.sampletime
 </rule>
 <rule name="noclient" if="laser.connected and core.clients == 0 and global.alive.laserstarted">
    global.alive.laserStarted = false
    print("Closing laser server - as there is no clients left on port " core.port)
    core.send("laser quit")
 </rule>
 <rule name="dead" if="deadCnt == allow">
    print("laser dead after " deadCnt " secs with no responce")
    print(" - laser status: laser.connected=" laser.connected ", laser.alive=" laser.hostalive)
    global.alive.laser = false
    global.alive.laserStarted = false
 </rule>
 <rule name="start" if="core.clients > 0 and not global.alive.laser and not global.alive.laserStarted">
    deadCnt = 0
    global.alive.laserStarted = true
    allow = 30 # allow for start-up time
    core.send("bash nice --adjustment=4 ./startserver ulmsserver -p 24919")
 </rule>
 </init>
 print("Started monitoring of laser")
 wait() : false
</rule>
keepucamserver.rule
<?xml version="1.0" ?>
<rule name="keepucamserver" if="defined('cam.connected')">
 <description>
   trying to keep camera server running, when a client is on the keeper server
   * ucamserver on port 24920
   running
 </description>
 <init>
 global.alive.cam = false
 global.alive.camStarted = false
 allow = 7  # allow time is allowed time to be dead
 deadCnt = allow + 1
 <rule name="camok" if="cam.connected and 
                        cam.hostalive and 
                        not global.alive.cam">
    global.alive.cam = true
    print("cam is alive after " deadCnt " secs to start")
    deadCnt = 0
    allow = 3  # seen alive to dead detect
 </rule>
 <rule name="camdeadCnt" if="not cam.connected or not cam.hostalive">
    if (deadCnt < 0.51)
      print("cam seems to be dying " deadCnt " : cam.connected=" cam.connected ", cam.alive=" cam.hostalive)
    deadCnt = deadCnt + rulestate.sampletime
 </rule>
 <rule name="noclient" if="cam.connected and core.clients == 0 and global.alive.camstarted">
    global.alive.camStarted = false
    print("Closing camera server - as there is no clients left on port " core.port)
    core.send("cam quit")
 </rule>
 <rule name="camdead" if="deadCnt == allow">
    print("cam dead after " deadCnt " secs with no responce")
    print(" - cam status: cam.connected=" cam.connected ", cam.alive=" cam.hostalive)
    global.alive.cam = false
    global.alive.camStarted = false
 </rule>
 <rule name="restartCamServer" if="core.clients > 0 and not global.alive.cam and not global.alive.camStarted">
    deadCnt = 0
    global.alive.camStarted = true
    allow = 30 # allow for start-up time
    core.send("bash nice --adjustment=5 ./startserver ucamserver -p 24920")
 </rule>
 </init>
 print("Started monitoring of cam")
 wait() : false
</rule>
Retrieved from "http://rsewiki.elektro.dtu.dk/index.php?title=Robot_GUI_(MARG)&oldid=724"
Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox