Drone motor test app
From Rsewiki
(Difference between revisions)
| Line 5: | Line 5: | ||
The app is intended to configure, measure and test the drone (inner) flight-controller. | The app is intended to configure, measure and test the drone (inner) flight-controller. | ||
| − | It is written with Qt5 and | + | It is written with Qt5 and python3 |
| − | + | Software is part of Mobotware using the name 'drone_ctrl'. | |
| − | + | ||
| − | Software is part of | + | |
== Drone test app== | == Drone test app== | ||
Latest revision as of 15:21, 17 November 2020
back to Drone control
[edit] Configuration and test app
The app is intended to configure, measure and test the drone (inner) flight-controller.
It is written with Qt5 and python3
Software is part of Mobotware using the name 'drone_ctrl'.
[edit] Drone test app
A motor test GUI is available (in the motortest_gui directory) - it will talk to the drone_ctrl firmware - some functions will work without the prop-shield.
Motor test GUI. There is the possibility to log time performance (in the log tab), to test run an ESC (or up to 6 ESCs) in the data tab.
The hardware configuration and pin-out are described in the hardware section above.
