Drone control
From Rsewiki
(Difference between revisions)
| Line 21: | Line 21: | ||
[[Drone compass calibration]] | [[Drone compass calibration]] | ||
| + | |||
| + | == ESC calibration == | ||
| + | |||
| + | The drone control uses ESC pulse width from 1 to 2 ms, and all ESCs should be calibrated to use this range. | ||
| + | |||
| + | [[ESC calibration]] | ||
== Propeller - motor performance == | == Propeller - motor performance == | ||
Revision as of 13:22, 2 December 2020
Drone project
This project is intended to be a rather simple core drone stabilizer application based on Teensy and the prop shield.
Intended to be expanded with an outer control loop with a non-realtime sensor, e.g. GNSS, camera or laser scanner.
Contents |
Hardware
Build on a hand-wired PCB as a prototype
Drone software
Magnetometer calibration
Calibration is used using a calibration version of firmware and a calibration app from Prop Shield manufacturer.
ESC calibration
The drone control uses ESC pulse width from 1 to 2 ms, and all ESCs should be calibrated to use this range.
