Drone motor test app
From Rsewiki
back to Drone control
Configuration and test app
The app is intended to configure, measure and test the drone (inner) flight-controller.
It is written with Qt5 and python3
Software is part of Mobotware using the name 'drone_ctrl'.
Drone test app
A motor test GUI is available (in the motortest_gui directory) - it will talk to the drone_ctrl firmware - some functions will work without the prop-shield.
Motor test GUI. There is the possibility to log time performance (in the log tab), to test run an ESC (or up to 6 ESCs) in the data tab.
The hardware configuration and pin-out are described in the hardware section above.
